menu

Japanese Chinese
Basic FAQ of Torque Meter

Torque Meter Basic FAQs

Unit

Conversion formula of torque unit  N• m / kgf• m / kgf• cm / gf• cm / mN• m(2012.12.01)
The setting method to change the display unit of N• m to kgf• m of the TS series torque detector(2015.08.03)
The setting method to change the display unit of kgf• m to N• m of the TS series torque detector(2015.08.03)
How to calculate the torque from the motor rating(2015.07.01)

Setup

Is it ok to attach the detector vertically? In that case, what are the points to be aware of? (2017.06.30)
Why is the shaft of the torque detector yellow?(2012.12.01)
How to remove rust prevention from the shaft of torque detector(2012.12.01)
Coupling and Centering(2014.08.04)
Coupling selection and centering accuracy(2014.08.04)
Wiring and noise(2014.11.04)

Accuracy & Calibration

The torque accuracy of the digital display(2015.07.01)
N-0 compensation function(2015.08.03)
Relationship between Factor and Zero (temperature characteristic)(2015.09.01)
Recommended calibration period of torque detectors(2020.07.31)

Rotation direction

How to check the rotation direction of the motor attached to the torque detector.(2017.05.31)
How to check the rotation direction of a motor attached to the SS series torque detector.(2015.04.01)
How to check the rotation direction of a motor attached to the MD series torque detector.(2015.08.03)
How to wire the power to switch the rotation direction of a motor attached to the DD series torque detector.(2015.08.03)
How to wire the power to switch the rotation direction of a motor attached to the DSTP series Torque detector.(2015.08.03)
How to control the rotation direction selection of the torque detector externally(2015.08.03)
Relationship between switching of CW/CCW and ± polarity of display/voltage output(2015.08.03)
How long does it take to switch CW/CCW when the rotation right and left cyclic direction test is operated?(2015.08.03)

Others

Is the TS-7700 compatible with Windows 10 Version 2004?(2021.05.25)
Warning signal is occurred to the DC power source when the use of SENSING terminal for the MT-6113 testing motor.(2017.05.31)
Do the input signal and output signal have common ground?(2016.11.01)
Relationship between time constant and cutoff frequency of low-pass filter(2014.06.02)
Is there any problem for measurement when main unit of Torque Detector generates sound?(2015.07.01)
Is it possible to use two torque detectors with one torque meter by switching signals?(2015.07.01)
What will happen if I attach a torque detector backwards, on the load side instead of the drive side?(2014.09.01)
The voltage output response of torque and rotation of the TS-410(2015.08.03)
Matching adjustment and accuracy when the change of the signal cable length(2015.08.03)
The connection cable between the torque detector and torque display unit(2015.08.03)
Change of the model name and outer dimensions of the MD series torque detector.(2015.08.03)
External control to switch the motor rotation direction of the MD series torque detector(2015.09.01)
External control to switch the motor rotation direction of the SS series torque detector(2015.09.01)
How long is the minimum bending radius of TS cable to be allowed?(2015.12.01)

webinfo

© Copyright. ONO SOKKI CO., LTD. All Rights Reserved. | Terms of use | Privacy policy