menu

Japanese Chinese

TS-2100/2600/2700 Torque converter FAQs

TS-2100

TS-2100 Voltage output(2016.01.05)
The outline of the TS-2100 Torque Converter (Components and functions)(2015.08.03)
TS-2100/2600 Troubleshooting(2015.09.01)

TS-2600

TS-2600 Voltage output(2016.03.01)
TS-2600 N-0 setting method(2016.03.01)
How to connect the BCD output of the TS-2600 to the PLC?(2015.09.01)
How to externally control the CW/CCW rotation direction switching of the TS-2600(2015.09.01)
TS-2600 RS-232C command(2015.09.01)
How to change the measurement display time of the TS-2600(2015.09.01)

TS-2700

TS-2700 Voltage output(2016.04.29)
TS-2700 Error of torque value - How to check the torque detector is breakdown or not.(2015.09.01)
How to return to the default menu (setting condition) setting
<Initialization method of setting condition>(2015.10.01)
How to check the setting zero correction value of TS-2700(2015.09.01)
TS-2700 Torque value does not become 0 even the torque is in no-load state.(2015.09.01)
How to externally control the CW/CCW rotation direction switching of the TS-2700(2015.10.01)
How to load the BCD output of the TS-2700/2600 into the PLC?(2015.09.01)
TS-2700 N-0 setting method(2015.10.01)
How to change the measurement display time of the TS-2700(2015.09.01)
TS-2700 Troubleshooting(2015.09.01)
How to zero the voltage output of the TS-2700?(2015.10.01)

Revised:2013/04/22


webinfo

© ONO SOKKI CO., LTD. 1996-2025 | Terms of use | Privacy policy