Please use the following cable models for the connection of torque detector and torque display unit.
| Torque detector | Cable model name | Display unit |
|---|---|---|
| SS series DD series MD series |
TS cable | TS series |
| DSTP series DP series |
TK cable | TS series |
TS cable (5 m cable is attached as a standard for a torque detector)
| Inner sheath color | ||
|---|---|---|
| No. | A1 | A2 |
| Discrimination | Gray/Blue | Gray |
| TRC116 Pin assignment | A | B | C | D | E | F | G |
|---|---|---|---|---|---|---|---|
| TC-4A cable Color of core wire | Gray/Blue (Gray/Black) conductor | Gray conductor | Gray/Blue (Gray/Black) shield | Gray Shield | Red | Black | Outer shield (Drain wire) |
| Input/ Output | SIG1 IN | SIG2 IN | SiG1 COM | SIG2 COM | N.C | N.C | Frame |
Characteristics
Voltage resistance: AC300V/min
Insulator resistance: DC100V 100MΩ or more
TK cable (5 m cable is attached as a standard for the torque detector)
| Inner sheath color | ||
|---|---|---|
| No. | A1 | A2 |
| Discrimination | Gray/Blue | Gray |
| TRC116 Pin assignment | A | B | C | D | E | F | G |
|---|---|---|---|---|---|---|---|
| TC-4A cable Color of core wire | Gray/Blue (Gray/Black) conductor | Gray conductor | Gray/Blue (Gray/Black) shield | Gray Shield | Red | Black | Outer shield (Drain wire) |
| Input/ Output | SIG1 IN | SIG2 IN | SiG1 COM | SIG2 COM | N.C | N.C | Frame |
| SIG1 12P2B Pin assignment | 1 | 2 |
| TC-4A Cable color of core wire | Gray/Blue (Gray/Black) conductor | Gray/Blue (Gray/Black) shield |
| Input/ Output | SIG | COM |
| SIG1 12P2B Pin assignment | 1 | 2 |
| TC-4A Cable color of core wire | Gray conductor | Gray shield |
| Input/ Output | SIG | COM |
Revised:2008/06/23
