How to control the rotation direction selection of the torque detector externally

We offer you the optional equipment for external control of the rotation direction.

 

• Option model name for the SS series torque detector: SS-0004 (Not available for SS-E series.)

• Option model name for the MD series torque detector: MD-0004

 

The power connector for the main unit becomes 2-pin to 4-pin, when you use the optional equipment. The switch for main unit is attached but it is not connected, so switching with the main unit is not available. The 5 m cable will be attached (one side connector plug RM15QPS-4SA – one side open). For the connection method, please refer to the instruction manual.

 

In addition, please switch the CW/CCW rotation direction of the TS series display unit side according to the motor rotation direction of the detector.

Revised:2008/06/23


© Copyright. ONO SOKKI CO., LTD. All Rights Reserved. | Terms of use | Privacy policy