ONO SOKKI - Tachometer FAQ

HOME
Support
Faq
Tachometer FAQ

HT series
TM-3100 series
TM-2000 series
FT-7200
FT-2500
SE/GE series

Tachometer FAQs (HT series)

Cannot measure when using the contact adapter for HT-5500 (Precautions when using the contact adapter for HT-5500)(2025.03.18)

When measuring line speed (Resolution: 0.1 r/min) with the HT-5500, how do I set the full scale of the analog output to 400.0 r/min?(2025.03.18)

When measuring rotation speed (Lo range, resolution: 0.1 r/min) with the HT-5500, how do I set the full scale of the analog output to 600.0 r/min? (2025.03.18)

I measure the rotation speed using HT-4200. The actual measured value is about twice as much as the predetermined rotation speed. Please tell me how to solve it. (2018.08.31)

The measurement accuracy comparison between the TM-3100 and the HT-5500.(2014.11.04)

Can I obtain the circumferential speed by measuring the rotational speed? (HT-5500)(2010.09)

Things to be aware of the first operation procedure for the HT-3000 series Handheld Digital Tachometer.(2007.02.19)

What is the measurement range of the HT-3200?(2013.06)

What is the measurement range of the HT-3100?(2007.02.19)

The HT-3100/4100 indicates "0" and stays the same.(2007.02.19)

What material is used to make the Reflective marks (HT-011)? What is the temperature range when in use? How can I purchase them? (2007.02.19)

Is it possible to measure with reflective marks (HT-011) cut into smaller pieces? (2007.02.19)

Tachometer FAQs (TM-3100 series)

When the rotation detection turns from ON to OFF, the display on the TM-3000 series remains for several seconds, then it becomes 0 after a while. (2018.07.19)

The waveform from TM-3000 series is output at regular intervals, but the entire analog output waveform fluctuates. (2018.07.19)

TM-3100 Common What happens to the analog output and the comparator output when pressing the MENU button, CONDITION button during measurement (during rotation speed display)?(2018.03.13)

TM-3130 Analog output (voltage, Current signal) in the SS measurement mode (2016.10.28)

TM-3100 common: How to return to the measurement screen from the setting screen.(2016.09.09)

TM-3140 "How to turn OFF (open) the relay when it is in error state."(2016.09.09)

TM-3140: How to compare and output the rotation speed to check if it is within the fixed range or not.(2016.09.09)

Can I see the comparator judgment state of TM-3140 by its display?(2015.08.26)

The measurement accuracy comparison between the TM-3100 and the HT-5500.(2014.11.04)

Required setup for replacing the TM-2100 with the TM-3100 when the pulse number is not clear.(2014.11.04)

What is the difference between Hz unit and r/s unit?(2014.11.04)

Setup example for the TM-3100 series 4 "Rotation measurement setup procedure with the MP-9100 detector."(2013.10.28)

When the input amplifier type "PULL UP" is selected, how much is the pull-up voltage and the resistance value of the pull-up resistor?(2013.03.26)

The relation of the TM-3100 display and analog/BCD output.(2012.05.21)

The display of the TM-3100 series is not stable (it shows error count).(2010.06.14)

Is the TM-3100 series compatible with the previous models of the TM-800/8000 series and the TM-2100 series?(2009.08.24)

How to confirm the built-in functions (inserted cards).(2009.08.24)

The switch operations for setting the menu.(2009.08.24)

Setup example for the TM-3100 series 1 "Rotation measurement setup procedure with the MP-981 detector."(2009.7.21)

Setup example for the TM-3100 series 2 "Rotation measurement setup procedure with the LG-916/930 detector." (2009.07.21)

Setup example for the TM-3100 series 3 "Line speed measurement setup procedure with the RP-721-120 P/R Roller Encoder."(2009.07.21)

How to clear the current setup and returns to the initial setup.(2009.08.24)

How to lock the keys?(2009.09.14)

Tachometer FAQs (TM-2000 series)

Setup example for the TM-2100 series 1
"Displaying the rotation speed with ○○○○ r/min after the detection of gear with 60 gear teeth with the MP-9100." (2013.03.26)

Setup example for the TM-2100 series 2
"Detect the gear with 60 gear teeth with the MP-981 and display the rotation speed with ○○○○ r/min"(2012.05.21)

Setup example for the TM-2100 series 3
"Displaying the rotation speed ○○○○ r/min after the detection from the LG-916 which sticks 1 sheet of reflective mark to the rotation axis" (2010.06.14)

Setup example for the TM-2100 series 4
"Displaying the rotation speed ○○○○ r/min after the detection from the LG-930 which sticks 1 sheet of reflective mark to the rotation axis" (2009.08.24)

Setup example for the TM-2100 series 5
"Displaying the speed with ○○○.○ m/min after the connection of the TM-2100 and the RP-704ZA-100P/R." (2009.08.24)

Setup example for the TM-2100 series 6
"Displaying the speed with ○○○.○ m/min after the connection of the TM-2100 and the RP-721-120P/R."(2009.08.24)

The setup method of the analog output for the TM-2130(2009.07.21)

BCD output and positive logic/negative logic(2009.07.21)

Why does the output voltage stay 0V when using the LG-916 combined with the TM-2130?
Why does the output voltage fluctuate and undulate when using the LG-930 combined with the FV-1100?(2014.02.03)

Advanced Tachometer FAQs (FT-7200)

How can I reset FT-7200 setting to the factory condition? (2019.10.31)

Advanced Tachometer FAQs (FT-2500)

Please tell me about setting precision and linearity of measurement accuracy and rotation speed of analog voltage output of FT - 2500. (2018.07.19)

When [MEMORY ERROR!] is appeared on the display of the FT-2500.(2014.11.18)

Engine Tachometer FAQs (SE/GE series)

When I am adjusting the trigger level, there are 2 places that the value of the display is stable. Which level should I choose to measure? (GE-1400 with CP-044)(2006.12.15)

webinfo