Set the CMP1 to UPPER and CMP2 to OK.
When the displayed value is smaller than UPPER value;
CMP1: Relay OFF/ CMP2: Relay ON.
When the displayed value is larger than UPPER value; CMP1:
Relay ON/ CMP2: Relay OFF.
This setting can be used when you want to turn the relay OFF in the maximum rotation speed.
■Upper setting When UPPER is above the display value, the relay is turned ON. ■LOWER setting When LOWER is under the display value, the relay is turned ON. ■OK setting When UPPER and LOWER is turned OFF, the relay is turned ON. When either of them is turned ON, the relay is turned OFF. |
Revised:2016.09.09
