menu

Japanese Chinese

VE series Gap Detector FAQs

When connecting an instrument with a PC via RS-232C, the communication is not working properly.(2025.12.12)
What is the advantage of using the VE series Gap Detector?(2011.04.18)
Which items can be measured by the VE series Gap Detector?(2011.04.18)
What is measurement principle of the Non-contact Thickness/Displacement Meter?(2011.04.18)
What is the linearity of the Non-contact Thickness/ Displacement Meter specification?(2011.04.18)
The influence of the VE series Gap Detector, when there are changes on environmental temperature(2011.4.18)
What is the principle of the insulator thickness measurement of the CL-5610 Non-contact Thickness Meter?(2013.08.08)
What range does the VE series Gap Detector measure? What is the minimum area necessary to measure an object accurately?(2011.04.18)
Which materials can be measured by the VE series Gap Detector?(2011.04.18)
Can composite materials (in the case of conductors) be measured by the VE series Gap Detector?(2011.04.18)
Can composite materials (in the case of insulators) be measured by the VE series Gap Detector?(2011.04.18)
How can I measure the displacement of the conductor and semiconductor by the Non-contact Thickness/Displacement Meter?(2011.04.18)
How can I measure the thickness of the conductor and semiconductor by the Non-contact Thickness/Displacement Meter?(2011.04.18)
How can I measure the thickness of the insulator by the Non-contact Thickness/Displacement Meter?(2011.04.18)
Why do they need the master piece calibration during the thickness measurement of conductor and semiconductor by Non-contact Thickness/Displacement Meter?(2011.04.18)
Is it possible to measure the edge of the target measurement object with the VE series Gap Detector?(2011.04.18)
To what extent is it necessary to match the verticality between the VE series Gap Detector and target measurement object?(2011.04.18)
How it is influenced to the measurement accuracy of the VE series Gap Detector, if the measurement surface is curved?(2011.04.18)
Is it possible to extend the cable between the VE series Gap Detector and the CL-5610 Non-contact Thickness Meter?(2011.04.18)
How often is the Non-contact Thickness/Displacement Meter updated?(2011.04.18)
What is the reproducibility of measurement value for the Non-contact Thickness/Displacement Meter?(2011.04.18)
I broke the VE series Gap Detector. Is it possible to buy only the Gap Detector and replace it?(2011.04.18)
Is it possible to replace and use several Gap Detectors with one amplifier?(2011.04.18)

webinfo

© ONO SOKKI CO., LTD. 1996-2026 | Terms of use | Privacy policy