How often is the Non-contact Thickness/Displacement Meter updated?
CL-5600/5610 The Non-contact Thickness Meter
The timing for updating a measurement value is shown as follows. When it moves at high speed, it measures the object intermittently.
| Display value | 0.5 s |
|---|---|
| Analog output terminal (A-OUT<CL-5610>, THICK<CL-5600>) |
20 ms |
| Analog output terminal (SENSOR-A, SENSOR-B) |
Frequency response range: 4,000 Hz Output it directly after adjusting a signal sensor. |
| RS-232C | Minimum 50 ms (Changeable with the ability or program for the PC.) |
| BCD output | 20 ms |
VT-5210/5220/5710/5720 The Non-contact Displacement Meter
Processing only with an analog signal so defined in a frequency response range.
| Frequency response range | 4,000 Hz
(VT-5210/5710) 10,000 Hz (VT-5220/5720) |
|---|
Revised:2011/04/18
