menu

Japanese Chinese

DS-3000series faq

DS-3000 series FAQs

The protect keys, DS-0299 ONO-LINK2 (USB) and DS-0399 ONO-LINK3 (USB) are not recognized in Windows 10.(2021.01.21)
How to read the data from multiple TEDS applicable sensors all at once?(2020.10.30)
How to change the output voltage on DS-0321 Time record signal output? (2020.10.30)
DS-3000 series software installed on a Windows 10 PC cannot be connected to the hardware after updating Windows. (2020.01.21)
What is the difference between FRAME LINK and FRAME LINK2? (2018.02.21)
Checking procedure when FRAME LINK2(unit connection function)cannot be used (2018.02.21)
What are instruments necessary and precautions for 4-unit connection (FRAME LINK2) (2018.02.21)
Tell me about the difference between DS-0321 and DS-0321A. (2018.2.21)
Overall value and partial overall value on the bundled octave by FFT analysis (2018.02.15)
The USB protect key driver cannot be installed. (2017.10.16)
When starting the DS-3000 series software, the error message that the firmware for DS series hardware cannot be updated and cannot connect to a hardware is displayed. (2017.08.04)
How to obtain the machine impedance with the impulse hammer (force sensor) and accelerometer (2017.06.15)
The number of channels and frequency range which can be analyzed in the DS-0342 Servo Analysis function (2017.04.19)
How to simultaneously observe the tracking diagram and power spectrum or time waveform while performing the tracking analysis by the DS-0322/DS-0222A. (2016.03.31)
What is the meaning and relationship of the trace line setting of the DS-0322 tracking analysis software? (2016.03.31)
Sampling frequency of recording file for offline analysis by using DS-0323 real-time octave analysis function (2015.06.30)
How to convert the speed which is measured by the laser doppler vibrometer to gravity acceleration (2015.02.25)
Sampling frequency of recording file for offline analysis by using DS-0323 real-time octave analysis function (2015.02.02)
How to operate frequency correction which is specified in [ISO 5349-1 (Mechanical Vibration-Measurement and evaluation of human exposure to hand transmitted vibration)] using the DS-0323 Real-time Octave software? (2015.02.02)
How long is the maximum recording time by the DS-0350 recording function software? (2017.03.24)
How to calibrate the unit of the MI series measurement microphone when there is no sound calibrator (2007.03.19)


webinfo





© Copyright. ONO SOKKI CO., LTD. All Rights Reserved. | Terms of use | Privacy policy