How to change the output voltage on DS-0321 Time record signal output?

 

Select “A/D Data Full-Scale Amplitude” in Time record signal output, Amplitude mode and set the amplitude value.

 

 

・Amplitude at Recording: Output the voltage of the recorded signal as it is.
・A/D Data Full-Scale Amplitude: The voltage range value (A/D full scale) at the time of recording is output at any voltage by setting the amplitude. The maximum voltage can be set as 10 V.

 

For example, if the voltage range is 0.1 Vrms (0.141 V) at recording and set the amplitude (V) as 5, the voltage is output as 35.5=5÷0.141.

 

 

 

webinfo





Copyright © ONO SOKKI CO.,LTD All Rights Reserved. | Terms of use | Privacy policy