Please update the firmware for DS-3000 hardware by the following procedure.
(1) Exit DS-3000 series software (DS-0320).
(2) By the following procedure, the firmware update program will start.
Windows start menu > all programs > "Onosokki DS-3000" > Common > "DSP Update”
(3) When you press the update button for the firmware update program, the firmware for DS-3000 hardware will be updated.
(4) When the message “Update was completed successfully” is displayed, press OK.
(5) Press the Close button of the firmware update program to exit the program.
(6) Reboot the software (DS-0320) for DS-3000 series. Connection with hardware will be performed.
Notes): To perform the procedures above, Windows® administrator privileges are required. Also, DS-3000 hardware needs to be connected to PC.
Revised:2017/08/04