ONO SOKKI - DS-3000 FAQ - How to operate frequency correction which is specified in [ISO 5349-1 (Mechanical Vibration-Measurement and evaluation of human exposure to hand transmitted vibration)] using the DS-0323 Real-time Octave software?

HOME
Support
Faq
DS-3000 FAQ TOP
DS-3000 FAQ

DS-3000 FAQ

FAQ top
DS-3000 series specification
Overview of FFT Analyzer
Outer Dimensions (PDF)
Product Brochures (PDF)

How to operate frequency correction which is specified in [ISO 5349-1 (Mechanical Vibration-Measurement and evaluation of human exposure to hand transmitted vibration)] using the DS-0323 Real-time Octave software?

First, download the following CSV file.
This is the definition file of the user filter for correction characteristics of the hand transmitted vibration.

Operation procedure

1. Select [Analysis Setting] > [Freq Weighting] from the menu. Select the frequency weighting to [User-def]. Open the user definition filter setting [Open] and load the downloaded CSV file.

2. Select the octave band width to [1/3].

Setting is now completed.

Revised:2015.02.02

webinfo