Products


Ono Sokki's Rotary Encoder has the specified types of output signal according to a model.
Counter or amplifier to be connected should be decided depending on the signal type.
Before usage, please check the output signal of your rotary encoder for appropriate connection.

Check the output signal type by "Table of Encoder output signal type"
             ↓
Select the compatible amplifier or counter as reference "Table of compatible counter • amplifier by Encoder output signal type"

Table of Encoder output signal type

Model name   Output type Load resistance
RP-1700 series Totem-pole 470 Ω or more
Collector 10 kΩ or more
Open Collector
Line driver
SP-405ZA series Collector 10 kΩ or more
Open Collector
RP-432Z series Totem-pole 1 kΩ or more
RP-7400 series Totem-pole 470 Ω or more
Collector 10 kΩ or more
Open Collector
Line driver

 

Table of compatible counter • amplifier by Encoder output signal type

  Connection device
FV-1500
FV Convertor
TM-3000
series

Tachometer
TM-5100
Tachometer

RV-3150
Reversible counter
PA-330ZA
Pulse transmitter
FV-1500 TM-3000 TM-5100 RV-3150 PA-330ZA
Output type Totem-poleTotem-pole< Connectable
Connectable
Connectable
Connectable
Connectable


It is necessary to remodel input resistant of PA-330ZA to 1.5 kΩ when PA-330ZA is connected to RP-432Z. (option)
Collector
Collector
Connectable
Connectable
Connectable
Connectable
Connectable

It is necessary to remodel input resistant of PA-330ZA to 47 kΩ. (option)
Open Collectoropen_out.gif Connectable

It is necessary to set the input of FV-1500 to PULL UP.
Connectable

It is necessary to set the input of TM-3000 to PULL UP.
Not connectable
Not connectable
Not connectable
Line driver Line driver Not connectable
Not connectable
Not connectable
Connectable
Not connectable

Revised:2015/11/19



webinfo

 

Copyright © ONO SOKKI CO.,LTD All Rights Reserved. | Terms of use | Privacy policy