menu

Japanese Chinese

Rotary Encoder FAQ

Rotary encoder FAQs (RP series common)

The output voltage is low for the rotary encoder with high level 5V type. To check the output voltage by oscilloscope, it should be 5V but around 2V. Is there any faulty? (2019.10.31)
Can the single phase signal (voltage output) of a rotary encoder be branched into two signals?(2007.10.15)
Can the single phase signal of a rotary encoder be branched into three signals?(2002.02.15)


Model name and specification of Rotary encoder (RP-1700 series)

 

Select the specification in order. The model name and the specification selected are displayed.

Select the model in each part. The specification of that model is displayed.

The successor model and specification corresponding to each of RP-110 series, RP-130 series, and RP-132D series are displayed.

 

Rotary encoder FAQs (RP-1700 series)

Please tell me about the shaft shape of RP-1700 series.(2018.7.26)
What is the meaning of each number or letter in the model name of the RP-1700 series?(2011.11.21)
What is the feature of the RP-1700 series?(2011.11.21)
What is the suitable peripheral device to connect to the RP-1700 series?(2011.11.21)
What kind of output type does the RP-1700 series have?(2011.11.21)
What is Totem-pole output?(2011.11.21)
What is open collector output?(2011.11.21)
What is collector output?(2011.11.21)
What is line driver output?(2011.11.21)
How long can be extended a cable for rotary encoder?(2011.11.21)
Do you have any advice on installing the RP-1700 series Rotary Encoder?(2011.11.21)
Do you have any advice on replacing the earlier model with the RP-1700 series Rotary Encoder?(2011.11.21)
Is it possible to use the wiring cable for the previous model into the latest model?(2011.11.21)
Is RP-1700 series protected against dust and water?(2011.11.21)
What is adjacent error?(2011.11.21)
Is it possible to use the RP-1700 series in overseas?(2011.11.21)


Revised:2018/10/31


webinfo

© Copyright. ONO SOKKI CO., LTD. All Rights Reserved. | Terms of use | Privacy policy