menu

Japanese Chinese
Portable Data Recorder FAQ

Portable Data Recorder FAQs

Does a signal output from OUTPUT (analog output terminal) while recording? (Can I monitor the signal?)(2019.06.25)
Can I delete recorded data in the SD card by operating the DR-7100? (2019.01.21)
How many files can be created when two units of the DR-7100 are used simultaneously and record data?(2017.12.07)
How to display the sound data from the Sound Level Meter or Microphone as a sound pressure level by using the OS-2000 series basic (2) (2017.07.12)
If the recoding time is set as 2 GB or more, is the recoding stop at 2GB? Or the recording continued until the capacity of SD card becomes full?(2017.06.09)
Initialization of the internal clock (when the clock display is not worked.)(2017.02.16)
Recommended SDHC memory card for LA-7000/LA-3000 series, DR-7100, CF-4700, CF-9200/9400(2016.09.05)
Trigger by signal input to an external terminal(PULSE/TRIG)(2015.06.16)
Can the DR-7100 be used with TEDS-enabled microphone?(2014.04.16)
How to execute unit calibration of a TEDS-based accelerometer using sensitivity data on the data sheet.(2014.04.16)
Bar graph is too large to the size of the input signal.(2014.04.16)
How to connect a TEDS-based accelerometer to the DR-7100(2014.01.20)
How to record for five minutes every hour by specifying the starting day and time. - Specifying the record starting time / finishing time and interval recording-(2014.01.20)
How to display the sound data from the Sound Level Meter or Microphone as a sound pressure level by using the OS-2000 series basic.(2013.03.26)

webinfo

© Copyright. ONO SOKKI CO., LTD. All Rights Reserved. | Terms of use