menu

Japanese Chinese
Acceleometer & related products FAQ

NP series Accelerometer & related FAQs

The signal from an accelerometer seems to break off. Sometimes disconnection is detected or there is no signal reception.(2014.03.03)
How to convert the miniature connector to the BNC connector/ How to use the NP-0021 Miniature/ BNC conversion adapter(2015.07.01)
Troubleshooting(2010.06.14)
What is the lateral direction sensitivity of single axis accelerometer?(2009.03.16)
What sort of sensor-specific information description does TEDS accelerometer has?(2008.12.15)
Does weight of an accelerometer have influence on the measurement result?(2002.08.19)
Is the measurement result of an accelerometer influenced by the alternating magnetic field?(2002.08.19)
How to convert an accelerometer waveform value to vibration level (2002.08.19)
Use of wax for NP-3210(2002.08.19)
Is it possible to measure under a frequency outside of the NP-3110 application frequency range (5Hz to 15Hz)?(2002.08.19)
How to convert voltage signal of an accelerometer into velocity or displacement (2002.08.19)
How to attach the accelerometer to high temperature objects(2002.08.19)
What does a 1G vibration feel like?(2002.08.19)
Can a cable for accelerometer be repaired?(2015.07.01)

GK series Impulse Hammer & related FAQs

Does the sensitivity value change depending on the tip attached to GK-3100?(2020.05.25)
Cable to connect the DS-2000 series FFT Analyzer and impulse hammer(2009.09.14)

AU series Signal Processing Unit FAQs

How to select the ground selector switch (Case/ Float) of the AU series(2007.08.20)

PS series Signal Processing Unit FAQs

The calibration procedure by using the DS-0021 FFT software when signal is integrated by the PS-1300(2007.08.20)

webinfo

© Copyright. ONO SOKKI CO., LTD. All Rights Reserved. | Terms of use | Privacy policy