Digital Gauge Counter
DG-2310
Not only the various calculating function of addition/subtraction (A+B, A-B) for 2 channels' data but also that of Max., Min., Range (Max. - Min.) are provided.
OK/NG judgment and alarm operation are also possible by using the comparating function.
Further, the sequencer, personal computer, recorder and other instruments can be operated by inputting the various signal output from DG-2310, which can make it possible for the data recording and monitoring easily.
Features
System Configuration
Application
Specifications Summary
Display | Main display: LED - Polarity (-) & numerical values (6 digits) |
---|---|
Sub display: LCD - 16 characters x 2 lines | |
Comparator display: LED - Upper & Lower/Red, Good/Green | |
Applicable sensors | GS/BS series Linear gauge sensor (excluding GS3800B) |
Input signal | Square wave signal with 90-degree phase difference |
DC to 100 kHz | |
External input signal | Input signal type:Voltage signals, Non-voltage contact signals |
Reset, peak-hold, hold, and key protection inputs | |
BCD signal | Output: BCD, Polarity, judgment, error: open collector (Max. 30V) Input: Reset/Hold, Hi: +4 to +5.25V, Lo: 0 to 1V |
Analog output | 0 to ±10V (Full Scale), 12-bit D/A, Refresh rate: less than 10ms |
RS-232C | Baud rate: 2400/4800/9600 bps |
Comparator output | Setting range at 0 to ±999999, output: LOWER/GOOD/UPPER Semiconductor relay, 30 VAC/0.1A, Refresh rate: less than 10 ms |
Calculation | A+B, A-B, B |
Peak hold | MAX, MIN, MAX-MIN (RANGE) |
Offset | Setting range at 0 to ±999999 |
Resolution | 0.5 μm, 1 μm, 10 μm |
Operating temp. | 0 to +40℃ |
Power supply | AC 100 to 240 V(50/60 Hz) |
Outer dimension | 144 (W)×72 (H)×180 (D) mm |
Weight | 約 1.3 ㎏ |
Accessories | Power cable, Conversion adaptor for power cable, Panel mount fixture, Stand foot, Terminal socket, Unit seal |
Options | ・AX-5022B RS-232C cable (2 m) |
・AA-8107 BCD cable (3 m) |
Revised:2023/07/20