FZ-2100,FZ2100,FZ-2200,FZ2200,Massflow,Coriolis method

HOME
Products
Automotive Solution
Mass Flow Rate Measurement System

Mass Flow
Rate Measurement System

Photo(Mass Flow Rate Measurement System)

This system uses two detectors, the FP-2140H volumetric flow detector and the FZ-2200 mass flow detector. Volumetric flow rate detected in high accuracy is converted to mass flow rate using density measurement values. Each value of the detector can also be displayed independently.

Features

Continuous measurement without being affected by temperature, pressure or density
Wide measurement range (up to a ratio of 1000:1 within ±0.35% of reading accuracy)
Density measurement enabled.
Function for removing air bubbles in fuel supply
Provided an initial air purging device useful in replacement of a testing engine.

System configuration

Illustration (System configuration of Mass Flow Measurement System)

Performance data

Performance data()

This shows accuracy of steady flow and repeatability in measurement. Wide range measurement is enabled from 0.23 to 150 kg/h with ±0.35 % rd of the accuracy.

Overview Specification

Applicable fluids		Gasoline, light oil, kerosene, standard petroleum oils etc. (alcohol fuels: option)
Measurement parameters		Flow rate, temperature or density
Measurement range	Normal mass flow rate	0.23 to 150 kg/h at 0.75 kg/cm³
	Normal volumetric flow rate	0.3 to 200 L/h
	Maximum flow rate	225 kg/h(300 L/h at 0.75 kg/cm³)
	Density ^(*1)	0 to 1 g/cm³
Accuracy	Flow rate	Within ±0.35 % of reading at 0.3 to 200 L/h
	Density accuracy	±0.0005 g/cm³
	Density repeatability	±0.0002 g/cm³
	Density temperature characteristic	±0.000015 g/cm³/°C
Pressure loss		-
Operating temperature range ^(*1)		0 to +40 °C
Weight		Approx. 200 kg(including a solenoid valve controller)

(*1): Please consult us more details.

Revised:2011/03/01

webinfo