DS-0399 (USB interface for DS-3000 series: USB 2.0 supported) will be available until March 2021.
The DS-0399 is the interface to connect the DS-3000 series Multi-channel Data Station (DS-3200 series) with a personal computer having a USB 2.0 port.
It enables to connect the ONO-LINK 3 connection terminal on the DS series main unit to the PC with USB2.0.
The modification of the main units is not required.
Features
System Configuration
Applicable products
| Hardware | DS-3100 / 3102 / 3104(*1) |
|---|---|
| Software | Software for the DS-3000 series excluding the following |
(*1) Both 40 kHz and 100 kHz units are available. However, the performance of throughput is limited.
Specifications
| Throughput performance(*2) | 100 kHz range / 2-ch 40 kHz range / 8-ch 20 kHz range / 16-ch |
|---|---|
| Minimum spec. (CPU) | Intel® Core™ 2 Duo (recommended : Intel® Core™ i5 or higher) |
| Interface | USB 2.0 (USB Hub: cannot be used)(*3) |
| OS | Windows® XP (32-bit), Windows Vista® (32-bit), Windows® 7, Windows® 10 |
| Simultaneous analysis recording | Supported(*4) |
| Unit connecting interface (FRAME LINK) |
Supported(*5) |
(*2) Throughput condition: A/D over information and rotation speed information are included. Stored with 24-bit.
However, regarding for the 100 kHz range, only A/D over information is included. Stored with 16-bit.
Throughput performance may vary depending on a PC performance and operation conditions.
(*3) Some PCs may cause communication error when connected to the USB 3.0 port.
In that case, please connect to the USB 2.0 port and use it.
(*4) The update speed may be decreased when 8 or more of analysis screens are displayed. There is no effect on the recorded data.
(*5) 100 kHz unit: Unit connection (FRAME LINK) is not supported.
Revised:2020/07/02
