How do I make the setting of the FV-1500 to input the rotation signal from a rotary encoder with open collector output or proximity switch?

In the setting mode, set the input signal format to PULL UP.


■ Operation procedure
1. In the measurement mode, press and hold [MENU] key to move to the setting mode.
2. With [∧]/[∨] key, select [MENU 0:INPUT]  and press [SET/NEXT].
3. With [∧]/[∨]key, select [INPUT-SIGNAL 3:PULL UP] and press [SET/NEXT].
4. By pressing [MENU] key, you will go back to the measurement mode.




Copyright © ONO SOKKI CO.,LTD All Rights Reserved. | Terms of use | Privacy policy