|
■Throughput disk function and offline analysis
The frequency range can be changed in the offline analysis from the basic frequency range while storing the data by using the throughput disk function.
Frequency range and zoom span setting range
| Frequency range | Offline | Frequency range at the time of offline mode analysis | ||||
|---|---|---|---|---|---|---|
| 40kHz | 25kHz | 20kHz | 10kHz | 8kHz | ||
| 40kHz | ◎ | ◎ | × | × | × | × |
| 25kHz | ◎ | ● | ◎ | × | × | × |
| 20kHz | ◎ | ● | × | ◎ | × | × |
| 10kHz | ◎ | ● | × | ● | ◎ | × |
| 8kHz | ◎ | ● | × | × | × | ◎ |
| 5kHz | ◎ | ● | ● | ● | ● | × |
| 1kHz | ◎ | ● | ● | ● | ● | ● |
| 500Hz | ◎ | ● | ● | ● | ● | ● |
| 100Hz | ◎ | ○ | ○ | ○ | ● | ● |
Supplement
◎:Basic frequency range
● :Selectable frequency range and zoom span frequency
○:Selectable in zoom span range
×:Not available
Revised:2000.10.13
