The list of specifications, accessories and options
The specifications, accessories and options are shown in the following diagram.

 

1. Specifications and accessories

Specification\ Model name DG-825 DG-925 DG-525H
(discontinued)
Measurement range 25 mm
Resolution 10 µm 1 µm 0.5 µm
Accuracy (as 20℃) 5 µm 3 µm 1 µm(DG525H)

1.5 µm(DG525)

Maximum spindle velocity 1 m/s 500 mm/s 300 mm/s
Measurement force 1.47 N
(150 g or less)
Display unit 4-digit liquid crystal display (with ±polarity) 5-digit liquid crystal display (with ±polarity) 6-digit liquid crystal display (with ±polarity)
Data output Serial BCD
Power AC adapter PB-701 or TA2096
(AC 100 V ± 10 % 50 to 60 HZ)
Continuous around 8 hours operation on secondary battery 16 hours charge.
Operating temperature range +5 ℃ to +40 ℃
Storage temperature range -10 ℃ to +55 ℃
Weight Around 180 g

Accessories

Finger lift (AA-969)
AC adapter (TA2096)

2. Option

Option \ Model name DG-825 DG-925 DG-525H
(discontinued)
Dust proof rubber AA-843
Mounting fixture (flat back) AA-968
Lift lever AA-971
Release lifter AA-972

Operating combination with release the AA-813 or the AA-816

Measurement tip List of "Measurement tip"
Extension spindle AA-844(for 30mm)
AA-845(for 50mm)
Dust proof rubber/ Measurement tip adapter for dust proof rubber AA-843

When combined with a measurement tip other than standard ones, the AA-829 measurement tip adapter is required.

Gauge stands

ST-022/044B/005
ST-011 (discontinued)

The AA-829 stand bush is required when the ST-044B is used.

ST-022/044B

The AA-829 stand bush is required when the ST-044B is used.

Digital printer RQ-2110

 

Revised:2002.03.15


Copyright © ONO SOKKI CO.,LTD All Rights Reserved. | Terms of use | Privacy policy