Setting and decision of the preset value (Common to PRESET 1 to 4)
Set the preset value as the decision criteria using the digital switch on the front panel.
Output conditions (Decision criteria) |
Decision result output |
---|---|
Set polarity=Measurement polarity |
PRESET display is lit in red. |
(Setting example 1) When dividing measurement results into four ranks.
(Preset values are all positive value.)
(Setting example 2) When dividing measurement results depending on the tolerance.
(Preset values are separately set for positive and negative)
Please be careful where to reset the spindle of the gauge sensor to zero.
Revised:2000/12/08