1. Phenomenon
The following warning message is displayed when the power of the CF-9200/9400 is turned ON.
2. Avoidance procedure
To erase the message, change the mode to configuration mode (CF-9200 Configuration Mode). Please operate the CF-9200/9400 with the following procedure. In addition, please supply the power from the attached AC adapter by connecting it to the CF-9200/9400.
(1) Move to the configuration mode
Touch the soft keys [System] > [Env Set] > [Config Mode] in this order on the (HOME) mode, touch OK in the displayed dialog box.
The CF-9000 Configuration Mode screen is displayed after the system of the CF-9200/9400 is automatically shut down
(2) Exit the configuration mode
Touch Exit on the CF-9000 Configuration Mode to exit the mode.
(CF-9000 Configuration Mode screen)
The CF-9200/9400 is automatically shut down (turn the power OFF) after touching the OK button on the following confirmation dialog box.
(3) Confirmation
Please check if the warning message is not displayed even the power of the CF-9200/9400 is turned ON.
*This warning message does not affect the accuracy of the function, performance, and measurement analysis of the FFT Analyzer. There is no problem with the recorded data.
Revised:2017/02/28