I want to judge multiple products with a shape comparator. Can I change the judgment line for each product?

Yes. There are two methods to change the judgment line.

 

  1. 1. Change the judgment line by saving data file in the CF-4700 main unit.  

 :Up to 20 kinds of judgment lines can be saved.

  1. 2. Change the judgment line by data file from the external device(PLC). 

 :Send a command via RS-232C communication, and make it read a file saved in SD card or USB
     memory to change. Judgment lines for multiple products can be saved.

 

■Create a Data File for Judgment (text format (txt.))

①. Make a setting of measurement conditions with CF-4700, and save the analyzed data
      as a text format (.txt).

 

②. Change letters of Y-axis value of this file into the judgment values. (Excel is useful.)

 

③. Save the changed file into SD card or USB memory.

 

 

Example)

ModelNo0254.txt
ModelNo3252.txt
ModelNo4221.txt
|
ModelNo01354.txt
ModelNo07813.txt

 

④. Prepare files for the kinds of judgment.

Note: If there is a difference between the measurement conditions of the main unit and those recorded in the file, data cannot be read.

 

 

■Register as Data File for Judgment

Specify and read a file for judgment (SD card, USB memory) to register as a shape data.

 

< Command:command (CSL) + full path name (drive name + file name) >

 

 

Example)  
SD card CSLZ:level001.txt
USB memory CSLF:level001.tx
   

 

         

  

        

Revised:2018/07/19



© Copyright. ONO SOKKI CO., LTD. All Rights Reserved. | Terms of use | Privacy policy