To make start averaging processing with an external signal, [INPUT RELAY] function on the real panel is used. The following is a procedure when the averaging time is set to 10 s.

Setup of averaging processing

 

Soft key

MAIN=>ANALYSIS=>AVERAGE=>TYPE=>TIME

 

 

Setup of averaging time

 

MAIN=>ANALYSIS=>AVERAGE=>SET=>TIME
Set [10 s] in the dialogue box

 

 

Setup of INPUT RELAY

Registry the command of starting averaging processing

Please refer to the "SETTING EXTERNAL RELAY FOR CF-4500" for the details of command registration.

Make short-circuit the 1 and COM of INPUT RELAY to start averaging processing.