ONO SOKKI - Non-contact Speedometer LC-761 System

Replaced by LC-8100A/LC-8200A GPS Speedometer

HOME >

Products Information >

Automotive Solution >

Non-contact Speedometer

Non-contact Speedometer
LC-761 System

(For Sideslip Testing)

Product Brochures (PDF)

LC-2100 Spatial Filter Type Speed Detector

The LC-761 Sideslip Testing System measures the vehicle’s speed with respect to the ground and the sideslip angle. Since it outputs the vehicle’s straight-line speed, lateral speed, and sideslip angle, the motion aspects during operational and stability tests can be continuously monitored. The LC-1100 detector is designed for the measurement of straight-line speeds, and the LC-2100 for the measurement of lateral speeds. Minute detector mounting angle errors have appeared until now as large speed error components in the measurement of vehicle lateral speeds. With the LC-761 system, an auto correction function is provided to correct any mounting angle error in the LC-2100 and thereby ensure accurate lateral speed measurement. Moreover, since the distance pulse output from the LC-5200 can be input as a straight-line speed signal, measurement of the sideslip angle can be performed while saving the straight-line speed data to the LC-5200’s memory.

System Configuration

(* Unable to measure under the condition of mirrored road-surface such as a puddle.)

Features

Simultaneous measurement of the straight-line speed, the lateral speed, and the sideslip angle.
Optimal system for drivability and stability tests.
Unaffected by slip and tire pressure and thereby ensure accurate measurement.
Can be measured within ±10cm of up-and-down movement, centering on the 50 cm above the ground.
Can be easily mounted to a vehicle body with a sucker.
Can be mounted on either backside or side panel of a vehicle.
Various running tests provided.

Specifications Summary

LC-1100 Non-contact Speed Detector

Speed measurement range	1.5 to 320 km/h (When the radius is 10R or higher at a level surface on the test course)
Detector mounting height	500 ±100 mm(height between the measurement surface and the detector tip)
Detector mounting angle	0° ±3° (torsional angle), 90° ±3° (forward direction), 90° ±10° (diagonal angle)
Measurement area	Approx. 46 mm x 60 mm (forward direction x vehicle width direction)
Light projector	12 VDC, 50 W (4.2A) Life: Approx. 400 hours of continuous use
Outer dimensions	Approx. 179 (W) x 330 (H) x 88 (D) mm (excluding the mounting fixture)
Weight	Approx. 1.6 kg (when the mounting fixture is excluded) Approx. 5.2 kg (when the mounting fixture is included)

LC-2100 Non-contact Speed Detector

Speed measurement range	-20 to +20 m/s (-72 to +72 km/h)
Detector mounting height	500 ±70 mm (height between the measurement surface and the detector tip)
Detector mounting angle	0° ±3° (torsional angle), 90° ±5° (forward direction), 90° ±3° (diagonal angle)
Measurement area	Approx. 50 mm x 50 mm (forward direction x vehicle width direction)
Light projector	12 VDC, 50 W (4.2A) Life: Approx. 400 hours of continuous use
Outer dimensions	Approx. 179 (W) x 330 (H) x 88 (D) mm (excluding the mounting fixture)
Weight	Approx. 1.6 kg (when the mounting fixture is excluded) Approx. 5.2 kg (when the mounting fixture is included)

LC-5200 Main Unit

Measurement range	Straight-line speed	1.5 to 250 km/h
	Lateral speed	-20 to +20 m/s
	Sideslip angle	0 to ±25°
Overall accuracy	Speed	±0.5%
Overall accuracy	Distance	±0.1% STD (when the straight line is 400 m or longer)
Built-in display unit		Red LEDs
Display parameter setting range	Straight-line speed	4 digits 000.0 to 250.0 km/h
	Lateral speed	Polarity + 4 digits 00.00 to ±20.00 m/s
	Straight-line distance	5 digits 0000.0 to 9999.9 m
	Lateral distance	Polarity + 4 digits 000.0 to ±999.9 m
	Display method	The straight-line speed and lateral direction distance are switch-selectable. The straight-line distance and lateral direction speed are switch-selectable.
External display unit	Straight-line speed	4-digit LCD, 0.0 to 250.0 km/h
External display unit	Sideslip angle	Analog meter display (0 to ±25°)
Speed display time		0.5 s automatic repeat
Analog output section	Straight-line speed	0 to +5.0 V/0 to 250 km/h
	Lateral speed	0 to ±10.0 V/0 to ±20 m/s
	Sideslip angle	0 to ±12.5 V /0 to ±25°
	Linearity	Within ±0.2% of reading
	Response	Approx. 0.08 s (straight-line speed)
Pulse output section	Distance	1 cm/pulse (Output constantly)
	Time	1 s/P (Only output for GATE ON)
	Level	TTL (10 kΩ load or higher)
Start/stop signals		Manual operation, external input, white line detection
Auto correction functions		Auto correction of the LC-2100 mounting angle error (torsional angle) (the correctable range is within ±5°, but only up to 200 km/h)
Power supply		10 to 15 VDC
Power consumption		Approx. 12 A (includes the whole system)
Operating temperature range		0 to +50°C
Outer dimensions		335 (W) x 110 (H) x 420 (D) mm
Weight (excluding detector)		Approx. 9 kg
Options		LC-065 Brake Test Commander When a braking test is performed, the LC-065 inputs a voltage signal (12 or 24 VDC) from the brake lamp and a non-voltage 1a contact signal from the tape switch (provided) or other source, and outputs an external start signal for the LC Series. This enables a voltage input from the vehicle’s brake lamp to be added to the non-voltage 1a contact signal. SF-061 Carrying case for the LC-1100/2100 models LC-0001A Halogen lamp for LC-1100/2100