FFT         Acoustic analysis

S-1-4      Quality control of wire harness device depending on the winding noise

  • This example shows quality control of the harness device included in the sliding door mechanism by using the sound generated during winding the harness. Drive a motor of wire harness system in a sound insulating box and the LA-1411 Sound level meter measures the sound generated during winding the harness. Then the CF-4700A performs frequency analysis of the AC output signal from the Sound level meter to make OK/NG judgment of the partial overall level in a specific frequency band.
  • Judgment area block (max: 20 blocks) is set up by the specified frequency range on the power spectrum and the upper/lower-limit levels.The most suitable judgment method can be selected from 6 kinds of judgment methods (level, peak level, peak max, insideMax, partial overall or area rate of content). The Digital I/O function also enables control by PLC* via comparator output.
  • The measurement results can be stored into a PC via LAN or RS-232C interface.

Product list

  Model Product name Remarks Qty
1 CF-4700A
FFT Comparator 1
2 LA-1411 Class 2 Sound level meter 1
3 AX-501 Output cable (2 m) 1
4 SC-2500A Sound calibrator 1
5 AG-2010 Microphone Extension cable 10 m 1