What are the signal cable and the connector model name for the RP-700 series Roller Encoder?

The signal cable and the connector of the cable side for the RP-720, RP-732 and the RP-704ZA Roller Encoder can be purchased as an option. Please refer to the following diagram for details.

 

(Applicable models: RP-721, RP-732, RP-704ZA and RP-7112)

 

Applicable Roller Encoder Cable name Signal cable model name Cable side connector model name Applicable display device
RP-721 R6 6-core twisted pair cable RP-004   5 m RM12BPE-5S
(Hirose electric co., ltd.)
TM-3100
series

RP-732 R6 6-core twisted pair cable RP-006  5 m RM12BPE-5S
(Hirose electric co., ltd.)
RV-3150

RP-704ZA R6 6-core twisted pair cable 3T5-3T5-D  5 m Both side: Crimp terminal RV-3150
(Caution)
Operate the terminal processing in the crimp terminal using the R6 cable.
RP-7112 R6 6-core twisted pair cable SNW-R60P SNW2010-PCF RV-3150

 

• We can provide the R6 and the RM12BPE-5S (Hirose electric co., ltd.).

• When the needs of the long cable which is more than 5 m, we are pleased to offer a quotation of the specified length as an option.

• For further information for the wiring, please refer to the Roller Encoder operation manuals.

 

Revised:2002.02.15



© Copyright. ONO SOKKI CO., LTD. All Rights Reserved. | Terms of use | Privacy policy