Mounting method of the DG-4240 Digital Gauge Counter to the panel.

The DG-4240 can be mounted on a panel cut in the size of 920+0.8×920+0.8 mm. The panel should be a steel plate with a thickness of 2 mm or more and 5 mm or less. Firmly fix the top and bottom of the counter to the panel using the attached rack mounting fixture.

 

 

(Caution) The panel cutout dimension is the figure when mounting three units on a same panel.


Revised:2000/12/08

Copyright © ONO SOKKI CO.,LTD All Rights Reserved. | Terms of use | Privacy policy