The use of EU calibration function when you input the sensitivity value and physical unit enables to direct read the power spectrum vertical axis into the acceleration value. For example, when the acceleration sensor outputs 1 mV per 1 m/s2, it enables to read the spectrum or overall value of the vibration acceleration directly with the acceleration value only by inputting [unit: m/s2, calibration value (V/EU): 0.001] to the device. Moreover, if it is linear spectrum, you can read with the unit of m/s2.
(Caution) For the clear display, input the unit of acceleration is not with the superscript but with m/s2.
Revised:(2009/11/16)
