ONO SOKKI - TS-2600 Torque Converter

TS-2600

Torque Converter
TS-2600 with Display

Photo (TS-2600 Torque Converter with Display)

The TS-2600 torque converter is the upper grade type of model TS-2100.
Despite compact designed body, it can provide a variety of functions on torque signal processing and signal outputs.
Measurement results of torque and revolution can be directly read out on the display, furthermore, offers high accuracy (±0.2 % FS of rated range of torque detector) and repeatability.
For outputs, 3 ways of outputs are available to use, analog voltage, BCD or RS-232C interface, its selection can expand capability of connection with external equipment such as a pen recorder, a sequencer, or a CPU.

Features

Compact and lightweight
Both torque and revolution measurement and direct read-out on the display
3 ways of signal output, analog voltage, BCD or RS-232C interface
High accurate measurement for torque at ±0.2 % FS, for revolution at ±0.02 % FS
N-0 compensation function provided (zero value compensation for torque data over the revolution range)

Specifications

Signal Input Section	Torque Signal	Type	Phase-differential type torque detectors
		Zero value memory	each for CW and CCW, with auto zero function
		N-0 compensation	5 points each for CW and CCW (can be set through RS-232C)
	Revolution Signal	Type	External : rectangular wave form (ex., MP-981 Magneto-electric rotation detector) Internal : torque measurement signal
		Input frequency	10 Hz to 100 kHz
		P/R setup	60, 120, 180, 240, 300, or 360 P/R, selectable
		Display unit	1 or 10 r/min, selectable
Display Section	Display Range		Torque : 0 to ±9999 Rev. : 0 to ±9999
	Display Units		Torque : Nm Rev. : r/min
	Indicator		4-digit, green LED display
	Display Update Interval		1 or 10s, and EXT, selectable
	Accuracy (averaged for a second)		Torque : ±0.2 % FS ±1 count Rev. : ±0.02 % FS ±1 count
Output Section	Analog Voltage Output	Level	10V max.
		Time constant	63ms (500ms as option)
		Linearity	Torque : ±0.2 % FS Rev. : ±0.2 % FS
		Isolation	250VDC max.
	Digital Output	Configuration	BCD positive logic, open collector output
		No. of digits	4 digits each for torque and revolution
		Accuracy	Torque : ±0.2 % FS ±1 count Rev. : ±0.02 % FS ±1 count
	RS-232C	Baud rate	9600
		Data	0-point, input of N-0 compensation, measurement value, reading of setting conditions
General	Power supply		90 to 264VAC, 47 to 63 Hz, approx. 20VA (at 100VAC)
	Operating temperature		0 to +40°C
	Outer dimensions		74 (W) x 142 (H) x 322 (D) mm
	Weight		Approx. 1.9 kg