Please use the exclusive PA-330ZC Isolation Pulse Transmitter.
The PA-330ZC is the transmitter which removes the output circuit of 330 Ω resistances from the PA-330Z by a modification (option).
The following is the outline block diagram of the PA-330ZC. (Applicable model: RP-721, RP-732 and RP-704ZA)
Outer diameter diagram
PA-330ZC Specification
| The number of input phases | 3-phase |
|---|---|
| Input resistance | 470 Ω |
| Input waveform | Rectangular wave, duty ratio around 50 % |
| Input voltage | L=0 to 4 V, H=8 to 12.5 V |
| Frequency | 0 to 50 kHz |
| Output | Collector output (Maximum rating DC 40V 50mA) |
| Delay time | Around 2 µs between input to output |
| Power requirement | AC 100 V Around 12 VA |
| Supplied voltage | DC 12 V 0.15 A |
| Withstand voltage | Between AC terminal and chassis: AC 1.5 KV Between input common 1 and output common 2, between output common 2 and chassis: DC 500V Between input terminal and chassis: DC 250 V |
| Isolation | Between input common 1 and output common 2, between AC terminal and chassis: 100 MΩ or more (at 1000 V megohm) |
| Operating temperature range | −5 to +40 ℃ |
| Storage temperature range | −10 to +70 ℃ |
| Weight | Around 4 kg |
| Terminal block | JIS C 2805 Applicable to 1.25 to 3 crimp-type terminal |
Revised:2002.02.15
