1. Memory types
There are five types of memories. Please use either of the following types according to your measurement application and purpose.
Type |
Function |
Number of memory |
|
Manual (MAN) | Stores LP, Leq, LPK, LMX, LMN, and LX data within one block. | 80 blocks |
|
Filter (FSCAN) | Scans LP, Leq, LPK, LAE, LMX, and LMN data in 1/1 or 1/3 octave band automatically. | 200 scans |
|
Common memory | AUTO | Stores Leq, LPK, LAE, LMX, and LMN data continuously within one block. | 20000 blocks |
AT LX | Stores Leq, LPK, LAE, LMX, LMN, and LX data continuously within one block. | 6600 blocks |
|
LP | Stores LP data continuously at specified intervals. (With variable sampling clock) | 99999 data |
2. Activating the memory mode
The memory mode is activated by pressing the panel switch [Memory Mode] of the secondary function. The screen of the normal mode (large screen) is changed to the memory screen (small screen). The memory mode changes in the order shown at right, each time you press the [Memory Mode].
<Notes>
The panel switch [Memory Mode] cannot be operated while recalling the memory data. In this case, press the panel switch [Recall] to cancel recall operation and then press [Memory Mode].
Revised:2001.10.12