-
The operation to return the condition to the factory default setting is also performed as a self checking, so sometimes the current conditions are cleared.
-
Please save the condition to the panel condition or FD beforehand.
-
The installed options attachment condition can be checked with the option list which displays on the screen.
<Operation procedure>
-
1. Press the RESET switch while pressing the SEARCH and RECALL switches at the same time.
-
2. Release the SERACH and RECALL switches when LED of all switches are turned on.
-
3. OPTION list appears on the screen after several tens of seconds (self checking). At this time, the lamp is blinked but it is not an error.
-
4. To restart, press the RESET switch.
-
-
(Note)
-
The option list is appeared on the screen in the procedure 3. As for the installed option, "OK" mark is indicated on each model name (CF-0550/0551/0552/TRACK or SIGOUT). When "OPTION" mark is appeared on the model name, the option is not installed.
(200.04.10) |
|