ONO SOKKI - Ignition Pulse Detector IP-3000A

Satisfying slim, light weight and high sensitivity !
One-touch clamping and easy to handle!

IP-3000A Ignition pulse detector is a slim and light weighted detector by using amorphous metals fiber element. It is 1/4 in thickness (mass: approx. 1/50) and 1/3 in weight compared with the previous model of Ono Sokki. Also the IP-3000A can obtain constant output from low to high rotation with high sensitivity.

Meeting the needs of structure or mechanism in recent gasoline engines, the IP-3000A can easily clamp around an ignition coil cable (the primary side cord of ignition coil or the current cord of electronic distributor). Moreover, heat-resistant design up to maximum operating temperature of +120 C° enables measurement under harsh environment.

The IP-3000A Ignition pulse detector can be used with Ono Sokki’s engine tachometer.

製品写真（IP-3000エンジン回転検出器のエンジンへの取付）

Applicable engine	Gasoline engine 2-cycle, 4-cycle
Detecting object	At the primary cord of ignition coil of gasoline engine or the current cord of electronic distributor
Max. diameter of applicable primary cord	Ø 5 mm max.
Output signal	Pulse signal
Signal cable	Heat-resistant signal cable: approx. 4.9 m (attached cable) with output connector (BNC)
Operating temperature range	-40 to +120 C°
Storage temperature range	-50 to +120 C°
Outer dimensions	8.0 (W) × 9.5 (H) × 30.0 (D) mm
Weight	80 ｇ (including cable)

Applicable Tachometers
<Option>

Universal engine tachometer
CT-6520B

Analog engine tachometer
AR-7240B

Gasoline engine tachometer
SE-1620

Advanced tachometer
FT-2500

CT-6520

AR-7240

SE-1620

・A variety of engine rotational detectors including IP-3000A can be available.

・Number of input pulses per rotation can be set in the range from 0.5 to 199.5 P/R in 0.5 P/R step

・3 kinds of outputs (digital, analog and pulse) are provided as standard.

・2 of preset setup for "Run Judge" and "Overrun"

・2 ways of power operation ; AC and DC

・Automatic switching of 2 ranges from low or high speed.

・2 of preset setup for "Run Judge" and "Overrun"

・Measurement range from 400 to 10,000 r/min.

・Easy reading thanks to 100 mm wide angle meter

・Both analog and pulse outputs are provided as standard.

・Applicable to 2-cycle (1 to 4 cylinders) and 4-cycle (1 to 6, 8, 10, 12 cylinders) gasoline engines.

・Measurement range from 500 to 20,000 r/min

・Convenient to on-board measurement or field measurement by 12 or 24 VDC power

・1024-point FFT calculation

・Input signal frequency from 3.75 Hz to 10 kHz (selectable from 3 ranges)

・The rotation measurement can be performed easily from direct signal of sound or vibration.

・Newly algorithm allows to follow the change in rotation speed or acceleration/deceleration.

・Analog output, pulse output and RS-232C communication function are provided as standard.

Revised: 2011/02/01