ONO SOKKI - MI-3000 series Mic Preamp.

Microphone Preamplifier

Microphone Preamplifier
MI-3110/3111 for 1/2-inch Condenser Microphone (ICP Type)
MI-3310 for 1/2-inch Condenser Microphone (Direct-input Type
for FFT Analyzers)

Outer Dimension (PDF)

nPreamplifier for 1/2-inch back electret-type microphone
New ! MI-3111	The MI-3111 is an exclusive preamplifier for 1/2-inch back electret-type microphone, which is applicable to CE marking^1. The MI-3111 also conforms to EMC so that it has high tolerance for noise. Featuring constant current operation, with a BNC input, thereby improving its ability in connection. Various types of instruments such as amplifier, instruments and data recorder with CCLD^2can be connected directly.

MI-3110 ＜Discontinued> （replaced by MI-3111）	The MI-3110 is a low-cost preamplifier for use with a 1/2-inch condenser microphone, featuring constant current operation, with a BNC input, thereby improving its ability in connection. When disturbing the sound field would be a problem, an optional extension rod can be connected to the MI-3110 to prevent disturbance. (The maximum measurable sound pressure level will be 135dB when combined with MI-1233/1234/1431/1432.)

nHigh performance preamplifier for 1/2-inch microphone
MI-3310	The MI-3310 is a preamplifier for use with a 1/2-inch condenser microphone, accepts both of bias-type and back electret-type microphones. It can be directly connected to an analyzer such as DS-2000 series, CF-3600A / 3800, CF-5200Z series, CF-7200 and covers a wide frequency range of 10Hz to 100kHz. A cable, AG-3300 series, is necessary for connection. (sold separately)

Specifications

<discontinued>
Replaced by MI-3111

Model	MI-3111	MI-3110	MI-3310
Applicable Microphone	MI-1233/1234/1431/1432	MI-1233/1431	MI-1211/1233/1431
Frequency range	10Hz to 20kHz	20Hz to 20kHz	10Hz to 100kHz
Gain	-2.0dB ±1.0dB (at 1kHz)	-3dB (at 1kHz)	-2.4dB (at 1kHz)
Input Impedance	Approx.5GΩ	Approx. 10 GΩ
Intrinsic Noise	22.3 μVrms or less (FLAT)	22.3 μVrms or less (FLAT)	6.3 μVrms or less (FLAT)
Distortion	1.0% or less	1.0% or less	0.5% or less
Operating Temperature	-10 to +50 °C
Operating Humidity	30 to 90% RH (with no condensation)
Max. Output Voltage	CCLD^*2 0.5 to 5mA / 15 to 25V	15 to 25V, 0.5 to 5mA	±15V
Max. Output Voltage	3 Vrms	3 Vrms	7 Vrms
Cable	MX-100 series, AG-2000 series (sold separately)	sold separately	sold separately
Outer Dimensions	12.7mm dia. x 61mm	13mm dia. x 61mm	12.7mm dia. x 129.5mm
Weight	Approx. 30g	Approx. 35g	Approx. 60g
Accessories	MI-0301 (microphone holder for mounting tripod)^*3		--

*1 Applicable condition for CE marking; cable extension for 30m or less.
*2 CCLD=Constant Current Line Drive
*3 The MI-0302 microphone holder adapter (3/8 in. diameter) is sold separately.

Cable

Model	Length	Outer dimension
MX-101	1.5m
MX-105	5m
MX-110	10m
MX-115	15m
MX-120	20m
AG-3301	5m
AG-3302	10m
AG-3303	20m
AG-3304	30m
AG-3305	100m (With reel)
NP-0131	1.5m
NP-0132	3m
NP-0133	5m
NP-0134	10m

Revised: 2009/10/30