This product is discontinued
  Ono Sokki Company, Ltd.

HOME > Products Information > Dimension & Displacement > RP-3130D series

Heat-resistant bottom-mount type for general-purpose

 

  • Designed for use in high-temperature environments, no need for applying air- or water-cooling

  • The outer dimensions and output signal of these encoders are compatible with the RP-110 series.

  • ”Noise immunity” circuit prevents power noise and erroneous signal generation caused by small vibrations.

  • On request, an oil seal can be fitted to the rotating shaft, making this encoder waterproof (IPX5 applicable.)

  • Usable in on-site installation and for long distance transmission

■ Standard number of output pulse (P/R)

200 360 600 1000 1200 2000 2500

■ Option number of output pulse (P/R)

3000 4000 5000

 

Electrical Specification (*:option)

Output waveform 2-phase square wave *zero mark
Output voltage Hi:10 V or more, Lo:0.5 V or less
Output type Totem pole output, load resistance 470Ω min.
*Open collector output 40 VDC, 50mA or less
Adjacent error ± 1/200P
Power supply 12 VDC ± 10% 180 mA
Response frequency 100 kHz
Connection method Terminal strip, M3 crimp-on terminals (JIS C2805 1.25 - 3)

 

Mechanical Specification

Maximum rotational speed 3000 r/min
Maximum allowable load Radial 80 N, Thrust 50 N
Starting torque 5 mN･m (oil-seal is provided-11 mN･m)
Moment of inertia 92.5 g･cm2
Weight 3 kg

 

General Specification

Operating temperature 0 to + 80 °C
Storage temperature -20 to + 85 °C
Humidity 95 % (when the shaft with oil seal / 40 °C / 8h, the rotating shaft is sealed.) with no condensation
Standard IPX5
Vibration 49 m/s2 (2h each in X,Y and Z direction)
Shock 980 m/s2

Revised: 2012/09/03
Contact Us Questions and Inquireies (Feedback form) Back to previous page