The frequency response function is calculated using an impulse hammer or exciter to obtain natural frequency of structure such as machines and automobile parts. The damping ratio is also calculated from the logarithmic decrement using the half-power bandwidth method or the Hilbert transform.
Model | Product name | Qty |
---|---|---|
DS-5100 | Main Unit | 1 |
DS-0526 | 6ch 40 kHz Input Unit | 1 |
OS-5100 | Platform | 1 |
OS-0522 | FFT Analysis Function | 1 |
OS-0512 | Hardware Connecting Function | 1 |
*The above is provided as “6 ch FFT set”.
Measuring natural vibration frequency and damping ratio of cylindrical object
When abnormal noise problem occurs, it is required to identify its frequency band. By applying IIR or FIR filters to the recorded data and viewing it, you can quickly find the frequency band of abnormal sound.
Model | Product name | Qty |
---|---|---|
DS-5100 | Main Unit | 1 |
DS-0523 | 3ch 40 kHz Input Unit | 1 |
OS-5100 | Platform | 1 |
OS-0522 | FFT Analysis Function | 1 |
OS-0521 | Digital Filter Function | 1 |
OS-0512 | Hardware Connecting Function | 1 |
*The above is one of examples.
Determine the index of pass/fail judgment of gear
Analyzing abnormal vibrations from a motor pump
In the sound and vibration generated from rotating objects such as motors, generators, and transmission, it enables to measure at which rotation speed each order component increases. Tracking analysis of carrier noise (offset tracking) generated from the switching signals of an inverter can be performed.
Model | Product name | Qty |
---|---|---|
DS-5100 | Main Unit | 1 |
DS-0526 | 6ch 40 kHz Input Unit | 1 |
DS-0542 | 2ch External Input Unit | 1 |
OS-5100 | Platform | 1 |
OS-0522 | FFT Analysis Function | 1 |
OS-0523 | Tracking Function | 1 |
OS-0512 | Hardware Connecting Function | 1 |
*The above is provided as “6 ch Tracking set”.
By using the 100 kHz unit of DS-5000 and the Laser Doppler Vibrometer, the ultrasonic vibration measurement can be performed for inverters, piezoelectric elements, MEMS, heads of ultrasonic bonding machine, and ultrasonic cleaning tanks.
Model | Product name | Qty |
---|---|---|
DS-5100 | Main Unit | 1 |
DS-0532 | 2ch 100 kHz Input Unit | 1 |
DS-0545 | 2ch Signal Output Unit* | 1 |
OS-5100 | Platform | 1 |
OS-0522 | FFT Analysis Function | 1 |
OS-0512 | Hardware Connecting Function | 1 |
*It is required when using an exciter.
The battery unit enables vibration and acoustic measurement even outdoors, factories or in places where power is not available.
Model | Product name | Qty |
---|---|---|
DS-5100 | Main Unit | 1 |
DS-0526 | 6ch 40 kHz Input Unit | 1 |
DS-0501 | Battery Unit | 1 |
*If using the viewer function of O-Solution Lite, you can record on site without any license.
Measurement of acoustic vibration of outdoor unit
By combining O-Solution with mapping software(*), it enables to visualize the natural vibration frequency and vibration behavior of structures such as motors and automobile bodies. By configuring multiple channels, multiple points can be measured simultaneously. Thus, the measurement time can be significantly reduced.
Model | Product name | Qty |
---|---|---|
DS-5100 | Main Unit | 2 |
DS-0526 | 6ch 40 kHz Input Unit | 7x2 |
DS-0545 | 2ch Signal Output Unit | 1 |
OS-5100 | Platform | 1 |
OS-0522 | FFT Analysis Function | 1 |
OS-0512 | Hardware Connecting Function | 7x2 |
AX-9055 | Hardware connection cable (3m) | 1 |
- | LAN cable for hardware connection | 1 |
*Software for sound pressure mapping is separately required.
It enables to analyze multiple channels' data such as motor shaft torque, motor rotation speed, engine shaft torque, dynamo rotation, engine rotation, and torque command value.
Displaying the entire waveform or the enlarged waveform of recorded data, searching data are available. The large volumes of time series data can be easily analyzed with using various calculation functions such as event counter, resampling, moving average, effective value calculation.
Model | Product name | Qty |
---|---|---|
OS-5100 | Platform | 1 |
The sound generated from a motor can be recorded with the Sound level meter and analyzed in detail with the O-Solution.
By importing the data (wav format) recorded by the Sound level meter into the O-Solution, playback of sound, frequency analysis, and Octave analysis can be performed on a PC.
Model | Product name | Qty |
---|---|---|
OS-5100 | Platform | 1 |
OS-0522 | FFT analysis function | 1 |
OS-0524 | Octave analysis function | 1 |
Using the library for the external control function (O-Step API), the O-Solution can be controlled from the user's application via TCP/IP. It enables to automate repetitive tasks and simplify analyzing large volumes of data.
Model | Product name | Qty |
---|---|---|
OS-5100 | Platform | 1 |
OS-0522 | FFT analysis function | 1 |
OS-0510 | External control function | 1 |