Specifications
Main Unit （DS-5100）
| 40 kHz system | 100 kHz system | |
|---|---|---|
| Maximum number of input channels | 48ch (240 ch when the hardware to hardware connection function used) | 4ch |
| Maximum number of output channels | 6ch | 2ch |
| Max. number of external input channels (revolution/trigger） | 4ch (10 ch when the hardware to hardware connection function used) | 4ch |
| Maximum number of input/ output units* | 8 units | 3 units |
| Hardware connection method | Daisy chain | None |
| Maximum hardware to hardware connection | 5 Units | None |
| *Main unit and battery unit excluded | ||
| General specifications | ||
|---|---|---|
| Operating temperature range | -10 to 50 ºC （humidity 20 to 80 %RH, no dew condensation） | |
| Storage temperature range | -20 to 60 ºC （humidity 20 to 80 %RH, no dew condensation） | |
| Applicable standards | CE marking | Low Voltage Directive 2014/ 35/EU standard EN61010-1 |
| EMC Directive 2014/ 30/ EU standard EN61326-1 | ||
| RoHS Directive 2011/ 65/ EU standard EN IEC 63000 | ||
Input Unit
40 kHz
More details
| Number of input channels | DS-0523: 3ch DS-0256: 6ch |
|---|---|
| Input terminal | BNC |
| Input format | Single end (each channel always isolated) |
| Frequency range | Max. 40 kHz |
| Sampling frequency | Max. 102.4 kHz |
| Sensor power supply（CCLD） | Provided (disconnection detection function is available) |
| TEDS function | Acceleration sensor of IEEE 1451.4 Ver.0.9 / 1.0 and microphone supported Power sensor of IEEE 1451.4 Ver. 1.0 supported |
| Maximum input voltage | 30 Vrms （42.4 Vpeak) |
| Frequency accuracy | ±50 ppm |
|---|---|
| D/A converter | 24 bit ΔΣ type |
| Dynamic range | 130 dB |
| Harmonic distortion | Less than 20 kHz -80 dB |
| Aliasing | -93 dB or less |
| Amplitude flatness | Less than 20 kHz ±0.1 dB 20 kHz or more ±0.2 dB |
| Full scale accuracy | ±0.1 dB (at 1 kHz) |
| Amplitude linearity | ±0.0015 % (in full scale) |
| Channel-to-channel cross-talk | -100 dB or less (at 1 kHz, 0-dBVr range) |
| Channel-to-channel gain accuracy (within the same range) |
Less than 20 kHz ±0.1 dB 20 kHz or more ±0.2 dB |
| Channel-to-channel phase accuracy (within the single unit) |
Less than 20 kHz ±0.1° 20 kHz or more ±0.7° |
| Channel-to-channel phase accuracy (between multiple units) |
Less than 20 kHz ±0.6° 20 kHz or more ±1.2° |
| Anti-aliasing filter | LPF 300 kHz, -3 dB |
100 kHz
| Number of input channels | DS-0532: 2ch DS-0534: 4ch |
|---|---|
| Input terminal | BNC |
| Input format | Single end (each channel always isolated) |
| Frequency range | Max. 100 kHz |
| Sampling frequency | Max. 256 kHz |
| Sensor power supply（CCLD） | Provided (disconnection detection function is available) |
| TEDS function | Acceleration sensor of IEEE 1451.4 Ver. 0.9/ 1.0 and microphone supported Power sensor of IEEE 1451. 4 Ver. 1. 0 supported |
| Maximum input voltage | 30 Vrms (42.4 Vpeak) |
* 40 kHz unit and 100 kHz unit of input units cannot be mixed.
More details| Frequency accuracy | ±50 ppm |
|---|---|
| D/A converter | 24 bit ΔΣ type |
| Dynamic range | 120 dB |
| Harmonic distortion | Less than 20 kHz -80 dB
20 kHz or more -75 dB |
| Aliasing | -93 dB or less |
| Amplitude flatness | Less than 20 kHz ±0.1 dB 20 kHz or more ±0.2 dB |
| Full scale accuracy | ±0.1 dB (at 1 kHz) |
| Amplitude linearity | ±0.0015 % (in full scale) |
| Channel-to-channel cross-talk | -100 dB or less (at 1 kHz, 0-dBVr range) |
| Channel-to-channel gain accuracy (within the same range) |
Less than 20 kHz ±0.1 dB 20 kHz or more ±0.2 dB |
| Channel-to-channel phase accuracy | Less than 20 kHz ±0.1° 20 kHz or more ±0.7° |
| Anti-aliasing filter | LPF 300 kHz, -3 dB |
External Input Unit
| Number of output channels | DS-0542: 2ch DS-0544: 4ch DS-0543: 2ch |
|---|---|
| Input terminal | BNC |
| Input format | Single end (each channel always isolated) |
| Maximum input voltage | 30 Vrms (42.4 Vpeak) |
Signal Output Unit
| Number of output channels | DS-0543: 1ch DS-0545: 2ch |
|---|---|
| Output terminal | BNC |
| Isolation | 42.4 Vpk Between BNC ground and frame ground, and between each BNC ground |
| Output voltage amplitude | ±1 mV to ±10 V |
| Offset voltage | ±10 V |
| Output coupling | DC |
| Maximum output current | 10 mA |
| Frequency range | 40 kHz : 0 to 40 kHz |
| 100 kHz : 0 to 100 kHz |
*"MIX IN" on the DS-0545 2ch Signal Output Unit can be used for the products to be developed.
More details| D/A converter | 24 bit ΔΣ type |
|---|---|
| Signal type | Sine wave, swept sine, random (no inter-channel correlation), pseudo random, impulse, octave band noise, pink noise, record data |
| THD and spurious | -75 dB or less (sine wave 1 kHz, amplitude ±1 V output) |
| Applicable FFT analysis length | 64 to 16384 (power of 2) |
| Zoom analysis | Supported (interlocked with zoom analysis range) |
| Voltage amplitude accuracy | Within ±0.2 dB (1 kHz, 1 Vpk, 1 MΩ load) |
| Frequency accuracy | ± 50 ppm |
| Digital filter | Smoothing filter- Base band: 10th order ellipse / Zoom: 6th order ellipse |
| Pink filter | Analog system: -3 dB/oct ±1.0 dB (specified at 20 Hz to 20 kHz) |
| Burst function | Provided (continuous/single, 1 ms to 32 s) Number of burst: 1 to 32767, in increments of 1 cycles |
| Taper function | Provided (1 ms to 32 s) Disabled when the burst function is enabled |
Battery unit
| Battery pack | Lithium-ion battery pack manufactured by RRC, RRC2020 99.6 Wh |
|---|---|
| Charging operation | When AC adapter is connected to DS-5100 main unit |
| External DC power input voltage | DC 10 V to 28 V |
| Option | Dedicated charger manufactured by RRC |
| External DC power cable 5 m （alligator cable with fuse） |