ONO SOKKI - Non-contact Speedometer LC-5200 System

Replaced by LC-8100A/8200A GPS Speedometer

HOME >

Products Information >

Automotive Solution >

Non-contact Speedometer

Non-contact Speedometer
LC-5200 System

(For mid-speed to high-speed tests)

Product Brochures (PDF)

The LC-5200 system covers wide measuring range from 1.5 – 320 km/h. The system is designed to support the ultra high-speed data acquisition intended for high-speed vehicles. The data can be saved to the various formats depending on the types of running tests (e.g. standing-start acceleration, passing acceleration, coast-down, brake, etc.) and printed out automatically or manually from built-in printer. Data storage capacity is approximately 1500 STEP. The data can be saved to the compact flash memory.
Compared to conventional products, the LC-5200 system has the capability to save data for a longer period of time. By using with the FP series volumetric type flow detectors (this is an optional setting) enables the LC-5200 to perform fuel consumption tests (constant fuel consumption test, fuel consumption pattern test). The amount and rate of fuel consumption obtained by the tests are printed out. The LC-5200 system is a portable attaché-case type which is convenient for carry out. Moreover, the system has been improved its performance and functions, and thereby improved the usability.

(* Unable to measure under the condition of mirrored road-surface such as a puddle.)

System Configuration

LC-1100 Spatial Filter Type Speed Detector

Features

Easy-to-read fluorescent display tube used in the display
Selectable display pattern to suit the test conditions (single-row or double-row display)
Built-in printer enables easy output of data
The measurement data can be saved to a compact flash memory card
Ten test modes provided
Compact design

Test Mode

No.	Test MODE	Test Description	Measurement Units, Other
No.	Test MODE	Test Description	Speed Step	Distance Step, Other
0	TEST (Calibration and equipment testing)	Measurement of the distance, time, and average speed from GATE ON to GATE OFF (white line detection possible)
1	SS400-1000 (Standing-start acceleration test)	Measurement of the distance, time, and section acceleration rate from the vehicle's standing-start position up to the 400-m or 1000-m position	Switched every 5 km/h 10 km/h 20 km/h	Switched every 25 m (50 m after 100 m) 50 m (100 m after 200 m) 100 m (200 m after 400 m)
2	ACCEL (Passing acceleration test)	Measurement of the distance, time, and section acceleration rate from GATE ON (JUST speed function enabled) up to the 400-m or 1000-m position
3	COAST DOWN (Coast-down test)	Measurement of the coast-down time and the coastdown coefficient from GATE ON (JUST speed function enabled) up to the 400-m or 1000-m position		Switched every 25, 50, 100 m
4	BRAKE-1 (Brake test 1)	Measurement of the initial speed at the braking start time point and the braking distance, time, and average deceleration until the stopping point	(Calculates and displays MFDD)
5	BRAKE-2 (Brake test 2)	Measurement of the initial speed at the braking start time point and the braking distance, time, and section deceleration until the stopping point	Measures deceleration using STEP DATA
5	BRAKE-2 (Brake test 2)		Switched every 5, 10, 20 km/h	Switched every 5, 10, 20 m
6	METER CHECK (Meter calibration)	Comparison of the vehicle's speedometer with the actual speed		Desired number of times measured
7	F-CONST (Constant fuel consumption test)	Measurement of the amount of fuel consumption and the fuel consumption rate from GATE ON up to the 500-m or 1000-m position		Switched every 100, 500, 1000 m
8	F-PATTERN (Fuel consumption pattern test)	Measurement of the amount of fuel consumption and the fuel consumption rate while changing the running pattern		Auto GATE OFF possible after 2 or 5 patterns
9	D.STEP PRINT (Fixed distance)	Continuous printing of the distance, time, and instantaneous speed from GATE ON (white line detection possible) to GATE OFF		Switched every 50, 250, 500 m

Specifications Summary

LC-1100 Non-contact Speed Detector

Speed measurement range	1.5 to 320 km/h (When the radius is 10R or higher at a level surface on the test course)
Detector mounting height	500 ±100 mm(height between the measurement surface and the detector tip)
Detector mounting angle	0° ±3° (torsional angle), 90° ±3° (forward direction), 90° ±10° (diagonal angle)
Measurement area	Approx. 46 mm x 60 mm (forward direction x vehicle width direction)
Light projector	12 VDC, 50 W (4.2A) Life: Approx. 400 hours of continuous use
Outer dimensions	Approx. 179 (W) x 330 (H) x 88 (D) mm (excluding the mounting fixture)
Weight	Approx. 1.6 kg (when the mounting fixture is excluded) Approx. 5.2 kg (when the mounting fixture is included)

LC-5200 Main Unit

Measurement range		1.5 to 320 km/h
Overall accuracy	Speed	±0.5%
	Distance	±0.1% STD (when 400 m or longer)
Built-in display unit		Fluorescent display tube (speed, distance, and simultaneous display of these two parameters)
Display parameter setting range (varies slightly according to the mode selected)	Speed	4 digits 0.1 to 320.0 km/h
	Distance	6 digits 0.0 to 99999.9 m
	Time	6 digits 0.00 to 9999.99 s
	Fuel rate	4 digits 0.00 to 99.99 km/L
External display unit		Speed, distance, and simultaneous display of these two parameters
Speed display time		0.5 s automatic repeat
Analog output section	Speed	0 to +6.4 V/0 to 320 km/h
	Linearity	Within ±0.2% of full scale
	Response	Approx. 0.04, 0.3 s automatically switched
Pulse output section	Distance	1 cm/P
	Level	TTL (22 kΩ load or higher)
Start/stop signals		Auto (Standing-start, speed, distance, stop coherence method) Manual operation, external input, white line detection, brake lamp input
Memory capacity		Approx. 15,000 steps
CF memory / Format method		Type Ι / FAT format
Memory format		Measurement data is saved in the CSV format.
Printing method		Thermal dot matrix
Printing speed		Approx. 2 lines/second
Recording section	Speed	4 digits
	Distance	6 digits
	Time	6 digits
	Acceleration	4 digits
	Accumulated flow	6 digits
	Fuel consumption rate	4 digits
Recording method		Switched between AUTO and MANUAL
Other functions		Fixed format for each test
Input pulse (flow)		FP series, 0.1 mL/P
Input pulse (distance)		1 cm/P
Power supply		10 to 15 VDC
Power consumption		Approx. 8 A (including light projector current)
Operating temperature range		0 to +50°C
Outer dimensions		330 (W) x 160 (H) x 350 (D) mm
Weight (excluding detector)		Approx. 7.5 kg
Options		FP Series Volumetric Type Flow Detectors The FP Series flow detectors are compact, lightweight volumetric-type flow meters that are ideal for in-vehicle mounting. Three measurement ranges are provided: 0.06 to 60R/h, 0.3 to 120R/h, and 1 to 1440R/h. Fuel quantities from micro-capacity flows during idling through to large-capacity flows under highspeed, high-load conditions can be measured. Moreover, a function for detecting the direction of rotation compensates for errors caused by pulsating or back flows enables highly accurate measurement within ±0.2% or ±0.5% of the reading. SF-061 Carrying case for the LC-1100/2100 models LC-0001A Halogen lamp for LC-1100/2100 PU-206 Recording paper for use with a printer