| D/A Conversion
and Analog Output |
D/A conversion
section |
digit |
BCD 3-digit
(000 to 999) |
| digit selection |
by digit
selection switch,
measured data, upper, middle or lower 3 digits of BCD 5-digit |
| conversion time |
40 μs or
less |
| linearity error |
within ±0.1%
of full scale |
| Analog
output section (voltage) |
voltage range |
0 to 10V
(corresponded to 3-digit of 000 to ±999) |
| voltage adjustable
range |
FULL : ±5%
of full scale
ZERO : ±0.5% of full scale |
| load resistance |
1 kΩ or more |
| protective circuit |
short protective
circuit included |
| Analog
output section (current) |
current range |
0 to ±16mA
(corresponded to 3-digit of 000 to ±999)
4 to 20mA (option) |
| current adjustable
range |
FULL : ±5%
of full scale
ZERO : ±0.5% of full scale |
| load resistance |
250 Ωor less |
| protective circuit |
short protective
circuit included |
| Signal
I/O |
BCD
(polarity signal input) |
signal |
Positive
logic pulse
polarity is "-" (negative) when high level. |
| voltage signal |
Hi: +3.4
to +5.5 V
Lo: 0 to 0.8V |
| non-voltage signal |
open voltage
: approx. 5V
short-circuit current : approx. 6mA |
BCD
(memory command input) |
signal |
Negative
logic pulse |
| operation edge |
Trailing
edge |
| pulse width |
10 μs or
more |
| voltage signal |
Hi: +3.4
to +5.5 V
Lo: 0 to 0.8V |
| non-voltage signal |
open voltage
: approx. 5V
short-circuit current : approx. 6mA |
BCD
(HOLD, RESET output) |
signal |
Negative
logic voltage output |
| pulse width |
Depending
on external command input |
| voltage signal |
Level "0"
: 0 to +1.4 V
Level "1" : +3 to +5.5V |
| External
command input |
signal |
External
contact input |
| pulse width |
4ms or more |
| open voltage |
approx. 5V |
| short-circuit current |
approx. 1.2mA |
| contact resistance |
max. 100
Ω or less |
| General |
Power
Supply |
100 to 240VAC
(50/60 Hz), 16 VA or below |
| Operating
temp range |
0 to +40°C |
| Outer
dimensions |
48 (W) x
96 (H) x 140 (D) mm |
| Weight |
approx 600
kg |
