FP-5000 series Volumetric Flow Detector FAQ
No, it cannot measure the gas flow rate.
Last updated:2021/12/27
FP-5130/5140 series
- EH-1130 line filter
- Mounting bracket (Appropriate bracket is supplied according to the selection of options. Either for 1 unit, 2 units or 3 unit)
- instruction manual
FP-5150 series
- EH-1150 line filter
- instruction manual
*The test certificate is sold separately.
Last updated:2021/12/27
The factor value of the FM-3100 has been set to "10000" by factory default.
- The factor value of the FP-5000 series Volumetric Flow Detector is “99999“, the FP-4135 is "10000".
- For other detectors, refer to the specifications of each detectors.
*Factor value setting is required for only FP series.
Last updated:2021/12/27
No.
Since the pulse setting of FP-5000 series is 1200 or 2400, the FP-5000 series does not support the DF-2410 (120 pulse ).
Last updated:2021/12/27